How to use setShareScope action in Jira Command Line Interface (CLI)

This article explains how to set the scope of a filter in Jira to either Global or Private using Jira Command Line Interface (CLI).

Instructions

The setShareScope action in Jira CLI, allows the filters to be available either globally or privately with Global and Private settings respectively.

1. Before creating a filter in Jira, set the scope of the filter using the action setShareScope as given in the example below:

   --action setShareScope --value Global

   This action defaults the filter share scope for the current user to Global.

2. Create a filter using the createFilter action as given in the example below:

   --action createFilter --name filterforTSboard --jql "project = TESTER01 ORDER BY Rank ASC"

   This action creates a filter named "filterforTSboard" for the Jira project "TESTER01".

3. Verify the filter permissions from Jira UI with the instructions below:
   1. Log into Jira as an administrator. 
   2. From the top navigation bar, click Issues.
   3. From the dropdown select the Manage filters option, as shown in the screenshot below:
      
      As the screenshot below indicates, the filter "filterforTSboard" has no restrictions and can be viewed by any logged-in user.
      

4. Similarly, the filters can be restricted by setting the scope to Private. Refer to the sample action given below for the same:

   --action setShareScope --value private

   --action createFilter --name filterforTSboard-1 --jql "project = TESTER01 ORDER BY Rank ASC"

5. The filter "filterforTSboard-1" is set as Private in Jira as shown in the screenshot below: