Copy attachment(s) which are more/less than a specific size.

Owned by Suprija Sirikonda, created
Last updated: Sept 22, 2023
2 min read

This article provides the code snippet to copy attachment(s) that are more or less than a specific size from the current issue to other issue(s) using post-function.

Instructions

  1. Navigate to the intended workflow and open it in Edit mode.

  2. Select the required transition.

  3. Select the Post functions tab and click Add post function.

  4. Add the post-function.

  5. Select the issues to which the attachments should be copied under “Target Issue(s)”.

  6. Select the “Attachment” field and add the below Nunjucks template:

    {% set finalAttachments = [] %} {% for att in issue.fields.attachment %} {% if (((att | field("size"))/1000) > 150) %} {% set ignored = finalAttachments.push(att) %} {% endif %} {% endfor %} {{ finalAttachments | dump(2) }}

    Replace 150 in line #3 with the desired file size (in KB). Additionally, replace the logical operator used (e.g. > in the example above) to implement the required logic.

  7. Select the “Treat value as JSON” option (select/unselect other options as per your use case)

In the example above, any attachment(s) that are more than 150 KB in file size are copied from the current issue to the configured target issue(s)

If this post-function is added on the create transition, select the checkbox “Delay the execution of this post-function” under “Delayed execution” and select a delay of 3 seconds.

 

References