Skip to end of banner
Go to start of banner

FAQ

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Frequently Asked Questions

General

Can Dataplane report on issues created before it was installed or only on those issues created or modified after installation?

Dataplane reports on the entire history of your Jira instance, providing a comprehensive analysis of even those issues created or modified before Dataplane Reports was installed.

When Dataplane Reports is first installed, it automatically indexes your entire Jira instance history including every issue creation, workflow transition, and field value change ever made. Once the initial index is complete, all subsequent changes in your Jira instance are tracked by Dataplane Reports in realtime.

So with Dataplane you get the same detailed insight into past project and team performance and metrics as you have going forward.

How current is the data I'm viewing in Dataplane Reports?

After Dataplane Reports does an initial index, upon installation, of your Jira instance history, all subsequent changes in your Jira instance are then tracked by Dataplane Reports in realtime.

So all Dataplane reports reflect the most current state of your Jira issues.  There is no delay between Jira issue changes and those changes being reflected in Dataplane Reports, whether those reports are viewed within Dataplane, on Jira dashboards, or in Confluence via a Dataplane Reports gadget.

Does Dataplane Reports modify Jira project or issue data?

No. All Jira project and issue data is treated as read-only by Dataplane Reports.

For its performance-optimized reporting and storing of saved reports and other app user data and settings, Dataplane Reports creates and maintains its own separate database tables within the Jira database.

Is Dataplane Reports subject to the same 1000 issue export limit as the Jira Issue Navigator?

No. Dataplane Reports works completely independent of the Jira Issue Navigator and is not subject to this limitation.

If you have not yet run into this limitation in the Jira Issue Navigator, it refers to trying to do an Excel export of the results of a Jira search and being limited to a maximum of 1000 issues (rows) that can be exported at any one time. This can make it difficult to pull comprehensive Jira data into Excel for additional analysis. The limit built into the Jira Issue Navigator is due to potential performance and memory issues with larger exports.  You may increase this limit via a Jira configuration parameter but should carefully monitor instance performance and memory usage in making any changes. Any changes made to Jira's export limit is independent of Dataplane Reports and has no effect on your export of issues from Dataplane.

With Dataplane Reports you can easily run reports on and export results containing tens of thousands of issues. Dataplane Reports' Issues Table Report is an excellent substitute for viewing and exporting issues from the Jira Issue Navigator. 

Dataplane's report queries are run directly against the Jira database rather than Jira's internal issue cache.  So that Dataplane Reports' database queries are not completely unbounded in result size, Dataplane places a soft limit on database query results of 20 million result items (20,000,000 rows x columns of data). While we expect this limit should be more than sufficient for the majority of Jira instances, if running a Dataplane report produces an error indicating this limit has been reached, you may tune the limit with the following JVM parameter:

-Dcom.arsenalesystems.dataplane.query.result.limit=30000000

Dashboard Gadgets

When using Dataplane Reports gadgets in Confluence, why am I getting an authentication prompt?

On some systems, after you add a Dataplane report to a Confluence page, users see a message similar to the following at the top of the gadget in Confluence:

If you are a registered user, there may be more information available to you. You will need to log in and approve this gadget's access to your account. (Show Restricted URLs)

[Login & Approve]

This message instructs users to confirm their identity to the Jira server. (The confirmation is performed using the industry-standard OAuth protocol.) When the user clicks "Login & Approve", they will be sent to the Jira server in order to confirm the connection, and they are then returned to Confluence to see the Dataplane report. This authentication prompt is a general feature of all Atlassian Gadget that require user authentication, so it is not specific to Dataplane.

In general, users should only have to perform this approval once. If users need to continually approve the gadget, or if even performing one approval is too much, some alternate solutions are listed below.

Solution 1: Switch to Trusted Application authentication

The easiest way to work around the problem is to configure the Application Link between the two applications to use Trusted Applications authentication. When Trusted Applications authentication is in use, authentication is automatic and users will never be asked to approve the gadget. To enable Trusted Applications:

  1. In Jira, go to Toolgear » Add-ons » Application Links.
  2. Find the Application Link corresponding to your Confluence server, then click "Edit".
  3. Click on "Outgoing Authentication".
  4. Click on the "Trusted Applications" tab (or ensure that it is already selected), then click "Enable".
  5. Click on "Incoming Authentication".
  6. Click on the "Trusted Applications" tab (or ensure that it is already selected), then click "Enable". You may need to scroll to the bottom of the dialog window to find the Enable button.

This procedure will enable Trusted Applications authentication for all gadgets, and the confirmation dialog should no longer appear.

Solution 2: Diagnose and Fix OAuth Configuration

If you do not wish to use (or cannot use) Trusted Applications for your Application Links, but you still receive the approval confirmation dialog more than once per user session, something is likely broken with your OAuth configuration.

Some of the following issues are known to cause problems with the OAuth confirmation:

  • accessing Confluence (or Jira) with a URL other than the base URL configured in the application's configuration page. For example, if Jira is configured with a base URL of "http://jira.mycompany.com" but users typically access Jira using a shortcut of "http://jira", OAuth may not work properly. To correct this issue, ensure that the base URL is configured correctly in the Jira system configuration, and then ensure that all users are accessing it with that name. If you run Jira behind a web server, you may wish to configure your web server to redirect all nonstandard URLs to the canonical URL.
  • configuring both Confluence and Jira on the same hostname, only differentiated by a context path or port. OAuth may not always work as desired if, for example, your Confluence server is accessible at http://tools/confluence and Jira is accessible at http://tools/jira. Similarly, trying to access Jira as http://tools:8080 and trying to access Confluence as http://tools:8090 may also cause problems. In this scenario, consider creating different hostnames for each applications. Both services can still continue to be run on the same physical or virtual machine, but they should be given their own distinct hostnames and URLs.

One additional tool for investigating OAuth problems is the OAuth authentication tokens page in the user's profile. To access this tool:

  • First, log onto Confluence as one of the users who is having authentication problems.
  • Try to display pages containing Dataplane gadgets a few times. Make sure that you authenticate the gadgets more than once.
  • Next, log into Jira as the same user.
  • Click on the user profile icon in the top right corner and select "Profile".
  • Click the "Tools" dropdown in the top right corner of the page, and select "View OAuth Access Tokens".

The subsequent OAuth Tokens page will show a list of all of the approved OAuth Access Tokens for the specified user. If you see a large number of tokens that were all approved at around the same time, you may need to go back and double-check the URL configurations.

When using Dataplane Reports gadgets in Confluence, why am I getting a PermissionException error?

When viewing a Dataplane Reports gadget in Confluence, users may get a message such as the following, even though they are correctly logged into both Confluence and Jira:

PermissionException: In order to access this feature, you need to log in.

This typically happens when using Application Links that are configured with Trusted Applications, but you are using incompatible versions of Jira and Confluence. In particular, Atlassian published a number of security advisories on 2014-02-26 that impact the following versions of Jira and Confluence:

If either your Confluence instance or your Jira instance fall into the above version range, you need to apply the official patches to both systems for the Trusted Applications link to work properly. For example, patching only Jira but not Confluence can lead to the above PermissionException errors, and, likely, other parts of the Application Link will not work correctly either.

If only one of your applications falls into the above version range, that application still must be patched, since the Application Links in later versions of Confluence and Jira are not compatible with earlier versions in the above range that do not have the patch.

When using Dataplane Reports gadgets in Confluence, why am I getting HTTP 504 timeout errors?

By default, Confluence has a short timeout when making HHTP requests to Jira from a Confluence macro. The default timeout in Confluence 6. x and above is only 5 seconds and in Confluence 5. x and below it is 15 seconds.

To solve the problem, you change the default settings in your instance.

How to change the timeout settings

  1. In your Confluence instance, click on the settings icon .
  2. In Configuration, select General Configuration.
  3. In Connection Timeouts, select Edit to adjust the settings.

If the problem persists, you need to edit the JVM system parameters for Confluence.

Editing the JVM parameter - Linux

  1. Go to $JIRA_HOME/bin/setenv.sh
  2. Edit the CATALINA_OPTS variable.
  3. For Confluence 6 and above, add the following parameter to CATALINA_OPTS:

    -Datlassian.HTTP.connection.timeout=60000

    For Confluence 5. x and below, add the following parameter to CATALINA_OPTS:

    -Dhttp.socket.timeout=60000

Timeout parameter values are in milliseconds, so the above change sets the HTTP timeout to 60 seconds (60,000 ms). If your longest-running Dataplane reports require more time, adjust this value accordingly. 

For Windows installations, follow Atlassian's documentation on editing JVM system parameters.

If you're running Confluence Data Center, do ensure to add this parameter in all of your Confluence nodes.

Confluence's Administration → General Configuration page has settings that would appear to change the applicable HTTP timeout, however, due to Confluence bug CONFSERVER-51594 Confluence gadget macros ignore these settings. For more details, see this Atlassian Knowledge Base article. You must instead use the JVM parameters listed below.



When using Dataplane Reports gadgets in Confluence, why is the gadget blank or cannot be configured?

We are aware of two possibilities:

Long-Running Reports Cause Timeouts and Blank Gadgets in Confluence

When a Dataplane report takes a long time to generate, the Confluence gadget may appear to be loading for a few seconds but then stop and render as a blank gadget.

To fix this, adjust Confluence's default HTTP timeout as described above 459800786.

Gzip Compression Causes Issues and Blank Gadgets with Jira 5.1 to 6.2.4

If you are using Jira 5.1 through 6.2.4 inclusive, a Jira bug (JRA-29795) requires that you disable Jira's built-in gzip compression feature to use the Dataplane gadget in Confluence. Jira 5.0.x and Jira 6.2.5+ are not impacted.

Atlassian already recommends disabling gzip compression if you are using Jira behind an Apache httpd server with mod_proxy, and they indicate that you may experience a performance gain by turning it off.

To disable gzip compression, access the Jira administration panel select System → General Configuration → Edit Configuration, and then disable the "Use gzip compression" feature. Failure to disable Jira's gzip compression will result in Dataplane gadgets failing to display in Confluence.

If you use Jira behind a web server proxy, you may still be able to leave gzip compression enabled on the proxy.

I'm still having problems with rendering Dataplane Reports gadgets in Confluence. Help!

Some customers have reported issues with the Application Links configuration when one application is configured to connect over regular HTTP, but the other application is configured to connect over HTTPS, and this problem is not specific to Dataplane. Ensuring that both Confluence and Jira use the same protocol may make it easier to set up a working application link.

Jira Issue Fields

What Jira issue fields are supported by Dataplane Reports?

Dataplane reports on a wide variety of Jira field types including:

  • the majority of built-in Jira fields
  • the majority of standard Jira custom fields
  • custom fields from several third-party apps including Elements Connect and ScriptRunner
  • all other third-party custom fields that are "stable" (have been implemented using the Jira CustomFieldStattable class)

For complete details, see the Dataplane Supported Jira Fields page.

Why is my custom field not in the list of fields that can be reported on?

The most common reason for this is, that after adding a new custom field to Jira that is supported by Dataplane Reports, you must:

  1. 459800786 to inform Dataplane about the new field, and
  2. rebuild your Jira index so that the custom field is useable by Jira 

Additional reasons the custom field may not be available in Dataplane are:

  1. your custom field may not be in the list of Dataplane's Supported Jira Fields, including supported third-party app custom fields.
  2. your custom field may be supported by Dataplane, but not in the context in which you are trying to use it in a Dataplane report. For example, historical reports like the Issues Value by Date Report, support a different set of fields than reports based only on an issue's current field values, since not all Jira fields are indexed historically by Dataplane. Additionally, only numeric fields can be used in Dataplane report configuration options that require a numeric value, as with the Value option in the Sum Numeric Field by Date Report.

Calculations and Values

When reporting on time durations, are the calculated total, average, max, and min times adjusted for non-working hours?

No. All reports that include time duration statistics—such as the Closure Time Report, Time in Status Report, or the Sum Numeric Field Report—currently use a raw calculation of hours that makes no consideration for non-working hours.

For example:

Fonts

Why are Dataplane Reports charts displaying unreadable font characters for axis labels and values? 

Under some circumstances, after installing a new Jira instance or upgrading an existing Jira instance, the font characters displayed on Dataplane chart axes and labels are unreadable.

Dataplane Reports assumes there is a font named "Dialog" installed and available to Java, or "LucidaSans" if on a MacOS server. These are default fonts that come with Java. The Java runtime may be unable to locate this font, or a mangled alternate version is overriding the default installed with Java. If you search your Jira server log file (logs/catalina.out) there may even be a mention of not finding this font.

One of the following solutions should fix the problem:

Solution 1: For Linux Servers, the Font Cache is Corrupted and Must Be Reset

If running Jira on a Linux server, occasionally the Linux font cache is corrupted and must be reset.  To do so:

  1. Enter the following command on the server: fc-cache -s
  2. Restart Jira

Solution 2: For Linux Servers, Install the Dejavu Font Packages

For Linux systems, some of Atlassian's Jira installer packages do not include the correct font families.  To fix the problem:

  1. Install the "yum" command on your Linux server if not already present
  2. Enter the following commands on the server:

    yum install dejavu-fonts-common
    yum install dejavu-sans-fonts
    yum install dejavu-sans-mono-fonts
    fc-cache -s
  3. Restart Jira

Solution 3: Verify Java's Default Fonts are Installed

  1. On your Jira server, copy the following code to a text file and name the file "ListFonts.java":

    import java.awt.GraphicsEnvironment;
    public class ListFonts {
        public static void main(String args[]) {
            GraphicsEnvironment e = GraphicsEnvironment.getLocalGraphicsEnvironment();
            for(String font:e.getAvailableFontFamilyNames()) {
                System.out.println(font);
    }}}
  2. Compile the Java code using the following command: javac ListFonts.java
  3. Run the code with the following command: java ListFonts
  4. Review the output to make sure the font "Dialog" is installed for Java (or "LucidaSans" if on a MacOS server):

    cmex10
    cmmi10
    cmr10
    cmsy10
    Dialog
    DialogInput
    esint10
    eufm10
    Lucida Bright
    Lucida Sans
    Lucida Sans Typewriter
    Monospaced
    msam10
    msbm10
    rsfs10
    SansSerif
    Serif
    stmary10
    wasy10
  5. If the required font is not installed you’ll need to install that font. A reinstall of the Java JRE might be the most simple way.
  6. Restart Jira

Administration

What does Sync Index do and when is it necessary?

To provide high performance historical reporting, Dataplane Reports builds and maintains its own optimized index of every change made to the issues in your Jira instance. Once Dataplane's index is built—after initial installation, on upgrade, or after manually clicking the Build Index button in Dataplane Administration—all subsequent issue changes in your Jira instance are tracked by Dataplane in real time.

There are a couple unconventional situations, however, where Dataplane's index of the state of your Jira instance may not be completely up-to-date: 

  • if you've added issues to your Jira instance unconventionally, such as with the Jira Importers Plugin, a third-party issue migration tool, or a command-line interface
  • if you've added a new custom field to your Jira instance

Under any of the above circumstances, the new issues or custom field will not be available within Dataplane until you click on the Sync Index button on the Dataplane Reports → Administration → Configuration page.

Sync Index tells Dataplane to re-synchronize its realtime indexing with the current state of your Jira instance, picking up any new custom fields or unconventionally created Jira issues. This incremental synchronization is very fast and should complete in under a minute on most instances.  

How do I disable the user feedback links in Dataplane Reports?

Dataplane Reports includes a number of links in the application to allow users to easily open a support ticket: to suggest new features or product improvements, to request help with a feature or report, or to file a bug.

If you wish to disable this feature, hiding all product feedback links in Dataplane Reports:

  1. Go to Jira Administration (gear icon) → Manage apps.

  2. Scroll down until you find the listing for Dataplane Reports, and click on it to expand the add-on listing.

  3. Click on the link labeled "xx of yy modules enabled" on the right-hand side of the listing. Then scroll down to see the list of individual components ("modules") of the Dataplane add-on.

  4. Find the "Issue Collector Web Resources (issueCollectorWebResources)" module and click on the Disable button that appears when you hover your cursor over that module listing.

The feedback module is now disabled, and Dataplane Reports product feedback links are no longer visible to users.

Does uninstalling Dataplane Reports delete any app user data or settings?

No. Uninstalling Dataplane Reports is perfectly safe, and does not delete any Dataplane Reports user data or settings.

Dataplane Reports user data and settings are stored in an app-specific set of Active Objects tables in the Jira database, which are left untouched when Dataplane Reports is uninstalled. Upon reinstallation of Dataplane Reports, all app user data and settings are available again within Dataplane.

Security

Is Dataplane Reports vulnerable to CVE-2021-44228 Apache Log4j2 exploit ("Log4Shell")?

No. Dataplane Reports is not vulnerable to CVE-2021-44228, which is based on an exploit of the Java log4j2 (v2.0+) library.

Dataplane Reports does not use log4j2. For logging, Dataplane uses the log4j v1.2.17 API provided by Jira; but this log4j version is not vulnerable to CVE-2021-44228. 

The Atlassian CVE-2021-44228 disclosure page details some specific circumstances in which a Jira instance, and apps like Dataplane Reports that use Jira's log4j v1.2.17 API, could be exposed to a CVE-2021-44228-like exploit should Jira be configured in a non-default way by an instance administrator. Please review that page in detail to determine if it applies to your Jira configuration.






  • No labels