How to add labels to all builds in a plan using Bamboo Command Line Interface (CLI)

This article explains how to add labels to all the builds in a particular plan using the Bamboo Command Line Interface (CLI) app.

Instructions

Use the runFromBuildList action with the addLabels action to add labels in all the builds under the specified Bamboo plan.

Execute the following CLI action:

 --action runFromBuildList --plan "TR-TP" --common "-a addLabels --build "@build@" --labels label1"

For this example, the output of the action is as follows:

Run: -a addLabels --build TR-TP-10 --labels label1
'label1' labels were added to TR-TP-10.

Run: -a addLabels --build TR-TP-9 --labels label1
'label1' labels were added to TR-TP-9.

Run: -a addLabels --build TR-TP-8 --labels label1
'label1' labels were added to TR-TP-8.

Run: -a addLabels --build TR-TP-7 --labels label1
'label1' labels were added to TR-TP-7.

Run: -a addLabels --build TR-TP-6 --labels label1
'label1' labels were added to TR-TP-6.

Run: -a addLabels --build TR-TP-5 --labels label1
'label1' labels were added to TR-TP-5.

Run: -a addLabels --build TR-TP-4 --labels label1
'label1' labels were added to TR-TP-4.

Run: -a addLabels --build TR-TP-3 --labels label1
'label1' labels were added to TR-TP-3.

Run: -a addLabels --build TR-TP-2 --labels label1
'label1' labels were added to TR-TP-2.

Run: -a addLabels --build TR-TP-1 --labels label1
'label1' labels were added to TR-TP-1.

Run completed successfully. 10 actions were successful

The following screenshot shows how the plan changes after adding the labels:

It is recommended to test the commands in a non-production environment or run the action with--simulate parameter to verify the behavior before deploying.