Skip to end of banner
Go to start of banner

How to add labels to all builds in a plan using Bamboo Command Line Interface (CLI)

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

This article explains how to add labels to all the builds in a particular plan using the Bamboo Command Line Interface (CLI) app.

Instructions

Use the runFromBuildList action with the addLabels action to add labels in all the builds under the specified Bamboo plan.

Execute the following CLI action:

 --action runFromBuildList --plan "TR-TP" --common "-a addLabels --build "@build@" --labels label1"

For this example, the output of the action is as follows:

Run: -a addLabels --build TR-TP-10 --labels label1
'label1' labels were added to TR-TP-10.

Run: -a addLabels --build TR-TP-9 --labels label1
'label1' labels were added to TR-TP-9.

Run: -a addLabels --build TR-TP-8 --labels label1
'label1' labels were added to TR-TP-8.

Run: -a addLabels --build TR-TP-7 --labels label1
'label1' labels were added to TR-TP-7.

Run: -a addLabels --build TR-TP-6 --labels label1
'label1' labels were added to TR-TP-6.

Run: -a addLabels --build TR-TP-5 --labels label1
'label1' labels were added to TR-TP-5.

Run: -a addLabels --build TR-TP-4 --labels label1
'label1' labels were added to TR-TP-4.

Run: -a addLabels --build TR-TP-3 --labels label1
'label1' labels were added to TR-TP-3.

Run: -a addLabels --build TR-TP-2 --labels label1
'label1' labels were added to TR-TP-2.

Run: -a addLabels --build TR-TP-1 --labels label1
'label1' labels were added to TR-TP-1.

Run completed successfully. 10 actions were successful 

The following screenshot shows how the plan changes after adding the labels: 

It is recommended to test the commands in a non-production environment or run the action with--simulate parameter to verify the behavior before deploying.

  • No labels