Related information for 5.5.0

Actions

	Action	Category	Description	Required parameters	Optional parameters	Output formats
1	addAgentAssignment	Agent Assignments	Assign a project, plan, or job to a specific agent. This makes the agent is dedicated to only perform builds for all assignments. Use continue to ignore already exists error.	agent, assignment	continue
2	addAgent	Agents	Add a local agent.	agent	description
3	addArtifactDependency	Artifacts	Add an artifact dependency to a job. Artifact must be a shared artifact from another job.	plan, job, artifact, location
4	addArtifact	Artifacts	Add an artifact definition to a job. Server instances only.	plan, job, artifact, copyPattern	location, shared
5	addComment	Comments	Add a comment to a build.	build, comment	number, findReplace, findReplaceRegex, file, encoding
6	addJob	Jobs	Add a job to a stage.	plan, stage, job	name, description, disable
7	addLabels	Labels	Add a comma separated list of labels to a build.	build, labels	number
8	addNotification	Notifications	Add a plan notification. There are 2 parts to a notification - an event that triggers the notification and a recipient type that determines the notification protocol. There are built-in notifications and others provided by add-ons. A recipient type may have additional parameters. Generally, these can be specified by the field and values parameters. In some cases, pre-defined parameters are available.	plan, event, recipientType	fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
9	addRepository	Repositories	Add a global or plan repository. For a plan repository, you can reference a linked (global) repository. Otherwise a valid repository key or alias is required. Valid aliases are: BITBUCKET, CVS, GIT, GITHUB, MERCURIAL, PERFORCE, STASH, SUBVERSION	repository or name	plan, repositoryKey, replace, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
10	addRequirement	Requirements	Add requirement to a plan job.	plan, job, requirement	type, value
11	addStage	Stages	Add a stage to a plan.	plan, stage	description, manual
12	addTask	Tasks	Add a task to a plan job. A valid task key or alias is required. Valid aliases are: ANT, ARTIFACT_DOWNLOAD, CHECKOUT, CLI_BAMBOO, CLI_CONFLUENCE, CLI_CRUCIBLE, CLI_FISHEYE, CLI_HIPCHAT, CLI_JIRA, CLI_STASH, GANT, GINT, GRADLE, GRADLEW, GROOVY, MAVEN2, MAVEN3, SCP, SQL, SCRIPT, SSH, VARIABLE_REPLACE	plan, job, taskKey	disable, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
13	addTrigger	Triggers	Add a trigger to a plan. Pre-defined types are: polling, remote, scheduled. One or more repositories can be specified for pre-defined type triggers based on repositories. Custom types can be specified with the appropriate trigger key (or alias) and all required parameters using the various field parameters. Alias types are: stashTrigger.	plan, name, type	repository, schedule, ipRestriction, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
14	addVariables	Variables	Add global or plan variables. Defaults to global variables unless a plan is specified. Use the field parameters for the variable name and the corresponding value parameters for the variable values,		plan, replace fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
15	clonePlan	Plans	Clone a plan.	plan, toPlan, name	description, projectName, disable
16	cloneProject	Projects	Clone each plan in a project to another project. If toProject is not provided, the plans will be cloned to the same project. If the toProject does not exist, it will be created with name provided by projectName.	project, toProject, projectName, disable
17	createOrUpdatePlan	Plans	Same as createPlan when plan does not exist. However, it will update an existing plan's name and description. Server instances only.	plan	name, projectName, description, disable
18	createPlan	Plans	Create a new plan. Provide a 2-part plan key where the first part is the project key. If the project key does not exist, it will be created with the provided project name. Server instances only. Use continue to ignore the request if the plan already exists.	plan	name, projectName, description, disable, continue
19	deletePlan	Plans	Delete a plan.	plan
20	deleteProject	Projects	Delete project and all project plans.	project	file
21	disableAgent	Agents	Disable an agent.	agent
22	disableJob	Jobs	Disable a job from running.	plan, job
23	disablePlan	Plans	Disable a plan from running.	plan
24	disableProject	Projects	Disable all project plans.	project
25	enableAgent	Agents	Enable an agent.	agent
26	enableJob	Jobs	Enable a job to run.	plan, job
27	enablePlan	Plans	Enable a plan to run.	plan
28	enableProject	Projects	Enable all project plans.	project
29	getAgentList	Agents	Get a list of agents based on regex filtering of agent names..		regex, file, append, encoding, columns	1 - basic 2 - detail
30	getArtifactDefinitionList	Artifacts	Experimental - only those available to be artifact dependencies in the last job! Get a list of shared artifact definitions for a plan with regex filtering on artifact name.	plan	limit, regex, columns, file, append, encoding
31	getArtifactList	Artifacts	Get a list of build result artifacts. When the build does not include a job portion, only shared artifacts are provided. Use @all for the job parameter to get both sharted and non-shared artifacts for all plan jobs.	plan or build	job, number, limit, regex, file, append, encoding
32	getArtifact	Artifacts	Download a copy of a build artifact into a file.	Uses same parameters and logic as getArtifactList for identifying build result artifacts to search. For artifacts that represent a directory (not a file), use the artifact name plus the path to the file in the artifact.	plan or build, artifact, file	job number replace encoding
33	getBuildList	Builds	Get a list of build reults. Build results can be filtered by using fields and values. Supported fields are state and started. For example, include only successful results by using: --field1 state --value SUCCESSFUL, or include only builds started after a specific date use: --field2 started --value2 2016-04-30 --dateFormat yyyy-MM-dd. Default limit is 25.	plan	limit, favorite, labels, issues, columns, file, append, encoding, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8	1 - basic 2 - test information
34	getBuildQueueList	Builds	Get a list of builds waiting in the build queue. Subset by project or build.		project, build, file, append, encoding, columns
35	getBuild	Builds	Get build result.	build	number, expand, file
36	getClientInfo	Info	Get information about the this client tool.		outputFormat, file, append, encoding	1 - basic 2 - JVM
37	getCommentList	Comments	Get a list of comments for a build.	build	number, file, append, encoding, columns
38	getJobList	Jobs	Get a list of jobs for a plan with regex filtering on job key or name. Subset by stage if desired.	plan	stage, regex, file, attribute, columns
39	getLabelList	Labels	Get a list of labels for a build.	build	number, file, append, encoding, columns
40	getLatestBuildNumber	Builds	Get the number of the last completed build for this plan.	plan
41	getNotificationList	Notifications	EAP (subject to change). Get a list of plan notifications.		plan, file, append, encoding
42	getPlanList	Plans	Get a list of plans for a project with regex filtering on plan key or name. Use @all for project to get a list of plans across all projects.	project	favorite, excludeDisabled, excludeEnabled, limit, regex, outputFormat, dateFormat, columns, file, append, encoding	1 - plan 999 - last build results
43	getPlan	Plans	Get plan information.	plan
44	getProjectList	Projects	Get a list of projects. Projects are selected based on regex filtering on project key or name.		regex, file, append, encoding, columns
45	getRepositoryList	Repositories	Get a list of global or plan repositories with regex filtering on repository name.		plan, regex, file, append, encoding
46	getRepository	Repositories	Get details of a global or plan repository. Sets the repository and repositoryId replacement variables.	repository	plan
47	getServerInfo	Info	Get information about the Bamboo server.		outputFormat, dateFormat, file, append, encoding	1 - basic 2 - detail 3 - state
48	getStageList	Stages	Get a list of stages for a plan with regex filtering on stage name.	plan	regex, file, attribute, columns
49	getVariableList	Variables	Get a list of global or plan variables based on regex filtering of variable names.		plan, regex, file, append, encoding
50	orderRepository	Repositories	Order repository in the list of repositories for a plan. Defaults to move the repository to the top to make it the default repository. Otherwise specify the after respository name.	plan, repository	after
51	queueBuildFromList	Builds	Queue multiple builds to run and wait for results. The action will not complete until all queued builds complete or times out. If continue is specified, builds will continue to be queued even after an attempt to queue a build fails. The action will fail if any build fails or times out. Conditional queueing is supported - see the documentation for details.	project or list	regex, limit, continue, timeout, dateFormat, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
52	queueBuild	Builds	Queue a build to run. If wait is specified, the action will not complete until the queued build completes or the timeout period elapses. The action will fail if the build fails unless continue parameter is used to ignore a failed result. A specific revision can be built if the revision parameter is specified. Plan variables can be set using the field and value parameters. Conditional queueing is supported - see the documentation for details.	plan	revision, wait, continue, timeout, dateFormat, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
53	removeAgentAssignment	Agent Assignments	Remove an assignment from a specific agent. Use continue to ignore not found error.	agent, assignment	continue
54	removeAgent	Agents	Remove an agent.	agent
55	removeArtifact	Artifacts	Remove an artifact definition from a job. Server instances only.	plan, job, artifact
56	removeLabels	Labels	Remove labels from a build. Labels can be a comma separated list or regex. Either build or search terms (searchLabels, issues) must be provided	labels	build, number, searchLabels, issues, favorite
57	removeNotification	Notifications	Remove a plan notification. Use id of -1 to remove all notifications for a plan.	plan, id
58	removeRepository	Repositories	Remove global or plan repository. Use @all to remove all repositories.	repository or id	plan, continue
59	removeRequirement	Requirements	Remove a plan requirement.	plan, job, id
60	removeStage	Stages	Remove a stage from a plan. Use id = -1 to remove all stages. Use continue to ignore not found errors.	plan, stage or id	continue
61	removeTask	Tasks	Remove a task from a plan job. Use id = -1 to remove all tasks.	plan, job, id
62	removeTrigger	Triggers	Remove a trigger from a plan. Use id = -1 to remove all triggers. Server instances only.	plan, id
63	removeVariables	Variables	Remove global or plan variables. Specify the variable names using the field parameters.		plan, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
64	renderRequest	Render	Render url based request. The response data modified by findReplace processing is returned.	request	requestParameters, requestType, type, acceptType, build, file, encoding, findReplace, findReplaceRegex
65	restartBuild	Builds	Restart a build that failed or was stopped. Use continue to ignore errors finding a build to restart or failed results.	plan	wait, timeout, continue
66	runFromAgentList	Agents	Run actions for each agent with regex filtering on agent name. Available replacement variables are agent and agentId.		regex, common, continue, simulate, clearFileBeforeAppend, file, encoding, findReplace, findReplaceRegex
67	runFromCsv	Run	Run actions generated from a CSV file.	file	common, propertyFile, continue, quiet, simulate, clearFileBeforeAppend, encoding, findReplace, findReplaceRegex
68	runFromJobList	Jobs	Run actions for each job with regex filtering on job key or name. Restrict to a specific stage or leave stage blank to get jobs across all stages. Available replacement variables are project, projectName, plan, planName, stageId, stageName, job, and jobName.	plan	stage, regex, common, continue, simulate, clearFileBeforeAppend, file, encoding, findReplace, findReplaceRegex
69	runFromList	Run	Run actions for each entry in a list. When file is provided, each action in the file augmented by the common parameter will be run for each entry. Otherwise, just the action specified by the common parameter will be run. Available replacement variable is entry.	list	file, common, continue, quiet, simulate, clearFileBeforeAppend, encoding, findReplace, findReplaceRegex
70	runFromPlanList	Plans	Run actions for each plan with regex filtering on plan key or name. Use @all for project to get a list of plans across all projects. Available replacement variables are project, projectName, plan, and planName.	project	favorite, excludeDisabled, excludeEnabled, regex, common, continue, simulate, clearFileBeforeAppend, file, encoding, findReplace, findReplaceRegex
71	runFromProjectList	Projects	Run actions for each project with regex filtering on project key or name. Available replacement variables are project and projectName.		regex, common, continue, simulate, clearFileBeforeAppend, file, encoding, findReplace, findReplaceRegex
72	runFromRepositoryList	Repositories	Run actions for each repository with regex filtering on repository name. Available replacement variables are repository and repositoryId.		plan, regex, common, continue, simulate, clearFileBeforeAppend, file, encoding, findReplace, findReplaceRegex
73	runFromSql	Run	Run actions generated by SQL provided by the sql parameter, a file, or standard input	sql or file or standard input	common, driver, database, host, port, url, dbUser, dbPassword, propertyFile, continue, simulate, clearFileBeforeAppend, encoding, findReplace, findReplaceRegex
74	runFromStageList	Stages	Run actions for each stage with regex filtering on stage name. Available replacement variables are project, projectName, plan, planName, stageId, and stageName.	plan	stage, regex, common, continue, simulate, clearFileBeforeAppend, file, encoding, findReplace, findReplaceRegex
75	run	Run	Run actions from a file or standard input.	file or standard input	common, continue, simulate, clearFileBeforeAppend, encoding, findReplace, findReplaceRegex
76	setDependencyOptions		Experimental. Set child dependencies and other related options.	plan	children, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
77	setJobOptions	Jobs	Set miscellaneous option for a job. The following options are specifically supported: clean working directory after job completes (cleanAfter switch) and pattern matching labeling (regex and labels parameters). Use the field and value parameters for additional settings with values determined from the screen. Some previous settings may be lost if not specifically requested.	plan, job	cleanAfter, regex, labels
78	stopBuild	Builds	Request to stop a queued or running build. Use continue to ignore errors finding a build to stop or failed results. The wait parameter will cause processing to wait for completion or timeout before returning.	plan	wait, timeout, continue
79	updatePlan	Plans	Update a plans name or description. Provide a 2-part plan key where the first part is the project key.	plan	name, description
80	updateRepository	Repositories	Update a global or plan repository.	repository or id	plan, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
81	updateRequirement	Requirements	Update a plan requirement.	plan, job, id	type, value
82	updateTask	Tasks	Update a task in a plan job. You must provide the same parameters as if you were creating the task.	plan, job, id	enable, disable, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
83	updateVariables	Variables	Update existing global or plan variables. Defaults to global variables unless a plan is specified. Use the field parameters for the variable name and the corresponding value parameters for the variable values,		plan, fields, field1, value1, field2, value2, field3, value3, field4, value4, field5, value5, field6, value6, field7, value7, field8, value8
84	validateLicense	Misc	Validates the CLI Connector is enabled and licensed on the server.
85	verifyBuild	Builds	Verify build was successful.	build	number

Parameter Tips

Common parameters

A few common parameters are available that are not specifically listed as optional parameters for each action: help, verbose, debug, quiet, special, dateFormat, dateFormat2, and outputType. Similarly for database related parameters that are optional for all get list actions: url, dbUser, dbPassword, database, driver, dbJar, host, port, dbCreateTable, dbTable, dbTableKeys, afterSql, and propertyFile.

Tips

To get help for a specific action, type the action followed by --help - example: --action getProjectList --help
Use double dash for multi-letter parameters - example: --help
Use single dash for single letter parameters indicated in the Short column in parameter help - example: -v
When parameters are specified, most need a value as indicated by a check in the Value column in parameter help - example: --action addPage
Some parameters are flags (boolean) and must not be followed by a value - example: --verbose
Parameter names are case sensitive, but, action values are not - example: --userid is invalid but --action addpage is equivalent to --action addPage
- An incorrect case parameter will result in an unknown parameter error and show action help with correctly cased parameter (9.8 or higher)
Some parameters become required once a specific action is chosen. This is indicated in the action help text as required.
Some parameters have both short (one letter) and long (more than one letter) parameter names - example: -a or --action are the same and cannot both be specified
Some parameters have default values, if so, they are indicated in the help text
Values that contain blanks or some special characters (platform specific) must be enclosed by double quotes - example: --title "this is my title"
Quoting rules in commands can vary by terminal environment:
- Windows command terminals or run action scripts for all platforms: embedded double quotes within a double quoted string must be escaped by doubling the double quote - example: –common "-a addComment --comment ""This is an example of a double quoted string inside a double quote"" "
- Linux and Mac/OSX command terminals require standard Linux style escaping: embedded double quotes within a double quoted string can be escaped with a \ - example: –common " -a addComment --comment \"This is an example of a double quoted string inside a double quote\" "
- Run CLI Actions usage: embedded double quotes within a double quoted string can be escaped by doubling the double quote (first example above)
- A single quote sometimes can used in place of a double quotes on some command terminal environments - example: –common '-a addComment --comment "This is an example of a double quoted string inside a double quote" '
Some parameters allow entry of a comma separated list of values, values containing a comma must be enclosed in single quotes - example: --custom "'first:a,b,c', second:x". Embedded single quotes within a quoted string must be doubled
Some text fields support the automatic conversion of " \n " (blanks are significant) to be replaced with a new line character - example: --description "A multi-line text field: \n # line 1 \n # line 2"

Special parameter

Some special characters are difficult to deal with or make action text very complicated. This is because they have special meaning in either the OS command terminal handling, the tool's command line parsing, or the tool's use of separators (like comma or colon separated lists). As a convenience to avoid some of these nasty situations, a special parameter was implemented to allow alternate characters to be used instead of (or in addition to) the problematic characters within parameter values. The choice of what special characters to use depends on the content so that you do not have conflicts with intended content. The special parameter works by the user providing a order specific alternate character. The alternative character is replaced with the real character after all other parsing occurs. It is implemented for many action parameters that are problematic in this area. Not all situations are covered, but, that will improve as other use cases are identified.

Position	Character	Character name	Suggested alternate	Usage
1	,	comma		Some parameters use comma separated lists.
2	:	colon	#	Some parameters use colon separated values.
3	@	at sign		Replacement variables syntax: @...@.
4	'	single quote		Used in separated lists to cover cases where content contains separator.
5	"	double quote	~	Parameters containing blanks.
6	^	caret		Substitution double quote indicator: ^^...^^. See ACLI-673 for details.

A blank in any position is ignored (no alternate provided).

Example: –special " #  ~" provides alternates for colon and double quote.

         --common "--findReplace ~something to find containing a : (colon)#replacement~"

Character Set

User and password values should be in the ISO-8859-1 character set. Also avoid characters that require escaping on your OS command terminal. Non standard characters will result in an authorization error similar to: User is not authorized to perform the request.

Parameters

	Parameter	Short	Description
1	acceptType		Content type to accept for renderRequest if different than type.
2	action	a
3	after		Used in orderRepository to name the repository after which the repository will be positioned.
4	agent		Agent name.
5	api		API version. Some requests produce different results based on the api version used. (default: latest)
6	append		For some actions using the file parameter, append will append output to the existing file.
7	artifact		Build artifact name. May be extended by a path name for locating files within an artifact representing a dirctory.
8	assignment		Key used to identify a project, plan, or job to be assigned to a specific agent. This makes the agent dedicated to only perform builds for all assignments. Example: XXX, XXX-DEF, XXX-DEF-JOB1
9	attribute		Attribute to list.
10	build		Build key. Normally used to refer to a specific build (3 or 4 part name). However, it was also an older terminology for a plan and some action continue to accept the older terminology. Example: XXX-DEF or XXX-DEF-1
11	childPlans		Comma separated list of plan keys that represent child plan dependencies.
12	cleanAfter		Clean working directory after each job completes. Use on setJobOptions.
13	clearFileBeforeAppend		For run actions, this option will automatically clear an existing file on the first append requested.
14	columns		Column selection and ordering when action generates CSV output. A comma separated list of column numbers (1-based) or column names (case insensitive). Only columns provided by the selected outputFormat are available for selection. Invalid columns will be ignored.
15	comment		Comment for an build.
16	common		Common parameter string added to all run actions.
17	connectionTimeout		Allow overriding environment settings for connect and read timeouts on URL connections. In milliseconds, 0 means infinite.
18	continue		Continue processing even after errors are encountered for run actions. Also used for some action to ignore certain errors like not found errors on remove actions.
19	cookies		Name of file to restore and persist cookies across invocations of CLI actions. Can be used to provide Data Center session affinity for actions using REST APIs.
20	copyPattern		Copy pattern for an artifact definition.
21	database		Database name is required for SQL actions.
22	dateFormat		Format string for dates in Java SimpleDateFormat. Default for output is client date format. Default for date parsing is lenient starting with client date format and then some other standard formats based on JSON date format.
23	dateFormat2		Alternate format string for dates in Java SimpleDateFormat. Use specific (may be ignored), but normally used for date only fields to avoid longer dateFormat based output. Some uses default to yyyy-MM-dd.
24	dbCreateTable		Experimental. Database table needs to be created before adding rows.
25	dbJar		By default, lib/jdbc is used to automatically load database drivers. Otherwise you can specify a specific file or url reference for the database driver jar. Example /jdbcDrivers/postgresql-9.3-1102.jdbc41.jar or https://jdbc.postgresql.org/download/postgresql-9.3-1102.jdbc41.jar
26	dbPassword		Database user password. Defaults to password.
27	dbTable		Experimental. Database table name when creating or updating a database from list output.
28	dbTableKeys		Experimental. Comma separated list of column names used to access existing rows for update. Normally this defines a primary key set for the table.
29	dbUser		Database user name. Defaults to user.
30	debug		Requests detail debug output. Optional for all actions.
31	description		Description for entity.
32	disable		Disable an entity for those entities like plans, stages, jobs, and tasks.
33	driver		JDBC driver class or predefined value: postgresql, mysql, mssql, oracle, or db2400. Required for SQL actions.
34	enable		Enable an entity when updating.
35	encoding		Character encoding (character set) for text based file content - must be an encoding supported by your JAVA platform.
36	event		Event alias or key. Add-ons provide events identified by key. Example key: com.atlassian.bamboo.plugin.system.notifications:chainCompleted.failedChains
37	excludeDisabled		Filter out entries that are disabled.
38	excludeEnabled		Filter out entries that are enabled.
39	expand		Expanded request information to obtain more detailed data on request.
40	favorite		Subset to favorites. Same as favourite.
41	favourite		Subset to favourites. Same as favorite.
42	field1		Construct specific field or variable name. Value is specified by the value1 parameter.
43	field2		Construct specific field or variable name. Value is specified by the value2 parameter.
44	field3		Construct specific field or variable name. Value is specified by the value3 parameter.
45	field4		Construct specific field or variable name. Value is specified by the value4 parameter.
46	field5		Construct specific field or variable name. Value is specified by the value5 parameter.
47	field6		Construct specific field or variable name. Value is specified by the value6 parameter.
48	field7		Construct specific field or variable name. Value is specified by the value7 parameter.
49	field8		Construct specific field or variable name. Value is specified by the value8 parameter.
50	fields		Use to specify task or repository specific fields or variables and their values. A comma separated list of key:value pairs. Single quote the key:value pair if it contains a comma (,) or line breaks.
51	file	f	Path to file based content or result output. Use - for standard input.
52	findReplace		Find and replace text. Comma separated list of colon separated pairs. Single quote values containing a delimiter. Embedded quotes must be escaped.
53	findReplaceRegex		Find and replace text with a regular expression. Comma separated list of colon separated pairs. Single quote values containing a delimiter. Embedded quotes must be escaped.
54	help		Prints this help message.
55	host		Database host server for SQL actions. Not used if url is provided. Defaults to localhost if not provided.
56	id		Stage or task id.
57	ipRestriction		Comma separated list of IP addresses to restrict ability to remotely trigger builds.
58	issues		Comma separated list of JIRA issue keys.
59	job		Job key. Example: JOB1
60	labels		Comma or blank separated list of labels.
61	limit		Maximum number of entries to return. (default: 2147483647)
62	list		Comma separated list of entries. Single quote values containing a delimiter. Embedded quotes must be doubled.
63	location		Working directory relative path to a source location for an artifact definition or a destination location for an artifact dependency.
64	manual		Indicate that a stage be run manually.
65	name		Name of entity, like plan name.
66	number		Build number. Defaults to latest. (default: 0)
67	outputFormat		Specify output format for an action. (default: 1)
68	password	p	User password for remote access.
69	plan		Plan key containing the project key. Preferred way to reference a plan instead of the older build terminology. Example: XXX-DEF
70	port		Database host port for SQL actions. Optional, defaults to database default. Not used if url is provided.
71	project		Project key. Example: XXX
72	projectName		Project name.
73	propertyFile		Property file with mapping information.
74	quiet		Limit some output messages. Optional for all actions.
75	recipientType		Recipient type alias or key. Add-ons provide recipient types identified by key. Example key: com.atlassian.bamboo.plugins.bamboo-hipchat:recipient.hipchat
76	regex		Regular expression for list filtering and similar. Also for pattern match labelling.
77	replace		Replace existing entity on add, create, or similar actions.
78	repository		Name of a repository. In some cases, a comma separated list of repository names.
79	repositoryKey		Repository key that uniquely identifies the repository type. Example: com.atlassian.bamboo.plugins.atlassian-bamboo-plugin-mercurial:hg
80	request		URL fragment for a request.
81	requestParameters		URL request parameters or post data.
82	requestType		Type of a render request like GET or POST (default: GET)
83	requirement		Plan requirement key, either a custom key or a system capability key like: system.builder.ant.Ant.
84	revision		Revision id or tag.
85	schedule		Cron, daily time, or periodic schedule. A cron schedule must be valid cron expresssions and defaults to 0 0 0 ? * *. A daily time is a 24 hour format (HH:mm) value. A periodic schedule is a numeric value in seconds and defaults to 180.
86	searchLabels		Comma or blank separated list of labels used for search.
87	server	s	Server URL. Normally the base URL of the server and the same as how the server is accessed from a browser.
88	service		Service address extension. (default: /rest/api)
89	shared		For an artifact definition, makes the artifact available for other builds.
90	simulate		Simulate running actions. Log the action that would be taken.
91	special		Ordered list of alternate characters for comma ( , ), colon ( : ), at ( @ ), quote ( ' ), and double quote ( " ) characters used for specialized processing of some specific parameters.
92	sql		SQL select statement used to generate a run script.
93	stage		Stage name.
94	taskKey		Task key. Example: com.atlassian.bamboo.plugins.scripttask:task.builder.script.An alias can also be used to make it easier and less error prone. See addTask for the list.
95	timeout		Wait timeout in seconds. Use -1 to wait forever. (default: -1)
96	toPlan		Plan key to be created. Example: XXX-DEF
97	toProject		Project key to clone to.
98	type		Requirement match type. Values: exist (default), equal, match. Also, content type for renderRequest and trigger type for addTrigger. (default: )
99	url		Action specific setting. Example: Database access url for SQL actions. Optional when host is provided.
100	user	u	User name for remote access. (default: automation)
101	value		Requirement match value.
102	value1		Value corresponding to the field1 parameter name.
103	value2		Value corresponding to the field2 parameter name.
104	value3		Value corresponding to the field3 parameter name.
105	value4		Value corresponding to the field4 parameter name.
106	value5		Value corresponding to the field5 parameter name.
107	value6		Value corresponding to the field6 parameter name.
108	value7		Value corresponding to the field7 parameter name.
109	value8		Value corresponding to the field8 parameter name.
110	verbose	v	Requests verbose output to help with problem determination. Optional for all actions.
111	wait		Wait for action to complete.

Bamboo Command Line Interface (CLI)

Reference - 5.5.0

On this page

Related information for 5.5.0

Actions

Parameter Tips

Parameters