Related information for 6.0.0

Actions

	Action	Category	Description	Required parameters	Optional parameters	Output formats
1	bamboo		Use the Bamboo CLI client to run an action.	common
2	bitbucket		Use the Bitbucket CLI client to run an action.	common
3	confluence		Use the Confluence CLI client to run an action.	common
4	crucible		Use the Crucible CLI client to run an action.	common
5	fisheye		Use the FishEye CLI client to run an action.	common
6	getClientInfo	Info	Get information about the this client tool.		outputFormat, file, append, encoding	1 - basic 2 - JVM
7	hipchat		Use the HipChat CLI client to run an action.	common
8	jira		Use the JIRA CLI client to run an action.	common
9	runFromCsv	Run	Run actions generated from a CSV file.	file	common, propertyFile, continue, quiet, simulate, clearFileBeforeAppend, encoding, findReplace, findReplaceRegex
10	runFromList	Run	Run actions for each entry in a list. When file is provided, each action in the file augmented by the common parameter will be run for each entry. Otherwise, just the action specified by the common parameter will be run. Available replacement variables are entry, entry2.	list	list2, file, common, continue, quiet, simulate, clearFileBeforeAppend, encoding, findReplace, findReplaceRegex
11	runFromSql	Run	Run actions generated by SQL provided by the sql parameter, a file, or standard input	sql or file or standard input	common, driver, database, host, port, url, dbUser, dbPassword, propertyFile, continue, simulate, clearFileBeforeAppend, encoding, findReplace, findReplaceRegex
12	run	Run	Run actions from a file or standard input.	file or standard input	common, continue, simulate, clearFileBeforeAppend, encoding, findReplace, findReplaceRegex
13	servicedesk		Use the Service Desk CLI client to run an action.	common
14	upm		Use the UPM CLI client to run an action.	common

Parameter Tips

Common parameters

A few common parameters are available that are not specifically listed as optional parameters for each action: help, verbose, debug, quiet, special, dateFormat, dateFormat2, and outputType. Similarly for database related parameters that are optional for all get list actions: url, dbUser, dbPassword, database, driver, dbJar, host, port, dbCreateTable, dbTable, dbTableKeys, afterSql, and propertyFile.

Tips

To get help for a specific action, type the action followed by --help - example: --action getProjectList --help
Use double dash for multi-letter parameters - example: --help
Use single dash for single letter parameters indicated in the Short column in parameter help - example: -v
When parameters are specified, most need a value as indicated by a check in the Value column in parameter help - example: --action addPage
Some parameters are flags (boolean) and must not be followed by a value - example: --verbose
Parameter names are case sensitive, but, action values are not - example: --userid is invalid but --action addpage is equivalent to --action addPage
- An incorrect case parameter will result in an unknown parameter error and show action help with correctly cased parameter (9.8 or higher)
Some parameters become required once a specific action is chosen. This is indicated in the action help text as required.
Some parameters have both short (one letter) and long (more than one letter) parameter names - example: -a or --action are the same and cannot both be specified
Some parameters have default values, if so, they are indicated in the help text
Values that contain blanks or some special characters (platform specific) must be enclosed by double quotes - example: --title "this is my title"
Quoting rules in commands can vary by terminal environment:
- Windows command terminals or run action scripts for all platforms: embedded double quotes within a double quoted string must be escaped by doubling the double quote - example: –common "-a addComment --comment ""This is an example of a double quoted string inside a double quote"" "
- Linux and Mac/OSX command terminals require standard Linux style escaping: embedded double quotes within a double quoted string can be escaped with a \ - example: –common " -a addComment --comment \"This is an example of a double quoted string inside a double quote\" "
- Run CLI Actions usage: embedded double quotes within a double quoted string can be escaped by doubling the double quote (first example above)
- A single quote sometimes can used in place of a double quotes on some command terminal environments - example: –common '-a addComment --comment "This is an example of a double quoted string inside a double quote" '
Some parameters allow entry of a comma separated list of values, values containing a comma must be enclosed in single quotes - example: --custom "'first:a,b,c', second:x". Embedded single quotes within a quoted string must be doubled
Some text fields support the automatic conversion of " \n " (blanks are significant) to be replaced with a new line character - example: --description "A multi-line text field: \n # line 1 \n # line 2"

Special parameter

Some special characters are difficult to deal with or make action text very complicated. This is because they have special meaning in either the OS command terminal handling, the tool's command line parsing, or the tool's use of separators (like comma or colon separated lists). As a convenience to avoid some of these nasty situations, a special parameter was implemented to allow alternate characters to be used instead of (or in addition to) the problematic characters within parameter values. The choice of what special characters to use depends on the content so that you do not have conflicts with intended content. The special parameter works by the user providing a order specific alternate character. The alternative character is replaced with the real character after all other parsing occurs. It is implemented for many action parameters that are problematic in this area. Not all situations are covered, but, that will improve as other use cases are identified.

Position	Character	Character name	Suggested alternate	Usage
1	,	comma		Some parameters use comma separated lists.
2	:	colon	#	Some parameters use colon separated values.
3	@	at sign		Replacement variables syntax: @...@.
4	'	single quote		Used in separated lists to cover cases where content contains separator.
5	"	double quote	~	Parameters containing blanks.
6	^	caret		Substitution double quote indicator: ^^...^^. See ACLI-673 for details.

A blank in any position is ignored (no alternate provided).

Example: –special " #  ~" provides alternates for colon and double quote.

         --common "--findReplace ~something to find containing a : (colon)#replacement~"

Character Set

User and password values should be in the ISO-8859-1 character set. Also avoid characters that require escaping on your OS command terminal. Non standard characters will result in an authorization error similar to: User is not authorized to perform the request.

Parameters

	Parameter	Short	Description
1	action	a
2	afterSql		SQL to run after a successful action. Limited to specific actions at this time.
3	append		For some actions using the file parameter, append will append output to the existing file.
4	bambooServer		Server parameter for Bamboo actions.
5	bitbucketServer		Server parameter for Bitbucket actions.
6	clearFileBeforeAppend		For run actions, this option will automatically clear an existing file on the first append requested.
7	columns		Column selection and ordering when action generates CSV output. A comma separated list of column numbers (1-based) or column names (case insensitive). Only columns provided by the selected outputFormat are available for selection. Invalid columns will be ignored.
8	common		Common parameter string added to all run actions.
9	confluenceServer		Server parameter for Confluence actions.
10	connectionTimeout		Allow overriding environment settings for connect and read timeouts on URL connections. In milliseconds, 0 means infinite.
11	continue		Continue processing even after errors are encountered for run actions. Also used for some action to ignore certain errors like not found errors on remove actions.
12	crucibleServer		Server parameter for Crucible actions.
13	database		Database name is required for SQL actions.
14	dateFormat		Format string for dates in Java SimpleDateFormat. Default for output is client date format. Default for date parsing is lenient starting with client date format and then some other standard formats based on JSON date format.
15	dateFormat2		Alternate format string for dates in Java SimpleDateFormat. Use specific (may be ignored), but normally used for date only fields to avoid longer dateFormat based output. Some uses default to yyyy-MM-dd.
16	dbCreateTable		Database table needs to be created before adding rows.
17	dbJar		By default, lib/jdbc is used to automatically load database drivers. Otherwise you can specify a specific file or url reference for the database driver jar. Example /jdbcDrivers/postgresql-9.3-1102.jdbc41.jar or https://jdbc.postgresql.org/download/postgresql-9.3-1102.jdbc41.jar
18	dbPassword		Database user password. Defaults to password.
19	dbTable		Database table name when creating or updating a database from list output.
20	dbTableKeys		Comma separated list of column names used to access existing rows for update. Normally this defines a primary key set for the table.
21	dbUser		Database user name. Defaults to user.
22	debug		Requests detail debug output. Optional for all actions.
23	driver		JDBC driver class or predefined value: postgresql, mysql, mssql, oracle, or db2400. Required for SQL actions.
24	encoding		Character encoding (character set) for text based file content - must be an encoding supported by your JAVA platform.
25	file	f	Path to file based content or result output. Use - for standard input.
26	findReplace		Find and replace text. Comma separated list of colon separated pairs. Single quote values containing a delimiter. Embedded quotes must be escaped.
27	findReplaceRegex		Find and replace text with a regular expression. Comma separated list of colon separated pairs. Single quote values containing a delimiter. Embedded quotes must be doubled.
28	fisheyeServer		Server parameter for FishEye actions.
29	help		Prints this help message.
30	hipchatServer		Server parameter for HipChat actions.
31	host		Database host server for SQL actions. Not used if url is provided. Defaults to localhost if not provided.
32	jiraServer		Server parameter for JIRA actions.
33	list		Comma separated list of entries to populate the entry replacement variable on runFromList. Single quote values containing a delimiter. Embedded quotes must be doubled.
34	list2		Comma separated list of entries to populate the entry2 replacement variable on runFromList. Single quote values containing a delimiter. Embedded quotes must be doubled.
35	outputFormat		Specify output format for an action. (default: 1)
36	parameters		Client specific parameters.
37	password	p	User password for remote access.
38	port		Database host port for SQL actions. Optional, defaults to database default. Not used if url is provided.
39	propertyFile		Property file with database parameters, field mappings, or client specific information.
40	quiet		Limit some output messages. Optional for all actions.
41	reference		Reference to a replacement key value used to remember an action specific value like issue key or similar so it can be referenced later.Each action that allows this parameter will specify what value is being set for the reference replacement key.
42	replace		Replace existing entity on add, create, or similar actions.
43	servicedeskServer		Server parameter for Service Desk actions.
44	simulate		Simulate running actions. Log the action that would be taken.
45	special		Ordered list of alternate characters for comma ( , ), colon ( : ), at ( @ ), quote ( ' ), and double quote ( " ) characters used for specialized processing of some specific parameters.
46	sql		SQL select statement used to generate a run script.
47	upmServer		Server parameter for UPM actions.
48	url		Action specific setting. Example: Database access url for SQL actions. Optional when host is provided.
49	user	u	User name for remote access.
50	verbose	v	Requests verbose output to help with problem determination. Optional for all actions.

Reference - 6.0.0

On this page

Related information for 6.0.0

Actions

Parameter Tips

Parameters