Skip to end of banner
Go to start of banner

Adding a new Mapping Scheme

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Current »

This guide walks you through the process of adding a new Mapping Scheme.

Guide

  1. Go to the Mapping Schemes Interface.

  2. Click the Add Mapping Scheme link shown beneath the heading in the page.



  3. Fill out the fields as defined below and click Add.

    1. Name: The display name for the Mapping Scheme. This should be something short and concise that describes the Mapping Scheme (e.g.: "Internal Projects Mapping Scheme")
    2. Description: A description to tell the administrator(s) about the purpose of the Mapping Scheme.



  4. You will be taken back to the listing of Mapping Schemes, with the one you just created in the list.



  5. You will then need to configure the scheme by adding the issue type and mapping associations.

What's next?

You should now proceed to:

  • No labels