Versions Compared

Old Version 2

changes.mady.by.user Daniel Barrow

Saved on

compared with

New Version 4

changes.mady.by.user Daniel Barrow

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Excerpt

A workflow post function that allows you to copy the values of one or more fields from the current issue or related issue(s) or a set of filtered issues to the specified destination issue(s).

Info

Note: When copying field values using this post-function, some consideration is required for specific fields in the destination issue(s):

  • Sprint - If you are setting the Sprint field and you try to copy the value for a closed sprint, that value will not copy. If you are copying multiple sprint values to the Sprint field and one of those values is a closed sprint, that value will not be copied (but the other sprint values will be copied).

To add the 'Copy issue fields' post-function to a transition: 

  1. Click Edit for the workflow that has the transition to which you wish to add the post-function on.

  2. In the Workflow Designer, select the transition.

  3. Click  Click Post Functions in the properties panel (or select the Post Functions tab).

  4. Click  Add  Add post function.

  5. Select Copy issue fields from the list of post functions.

  6. Click  Add to navigate to the Click Add. The Copy issue fields post-functionscreen will open, where you can configure the post function as needed. Click here See below for more details on specific configurations.

  7. Click Add to complete the configuration and add the post-function to the transition.

After adding, move the post-function to the appropriate position according to Placing post-functions in a transition document.Click here for a sample use case.

Info

You are viewing the documentation for Jira Cloud.

On This Page

Table of Contents
minLevel1
maxLevel2
outlinefalse
typelist
printablefalse
Image Removed

Issue(s) to operate on

  • Source Issue(s)

:

  • - Select the issues from which the specified field(s) from the Fields to copy section are copied. Select one of the following:

    • Current issue

:

    • - Select this option to copy the value of the selected field(s) from the current issue. This is the default option.

    • Sub-tasks of the current issue

:

    • -Select this option to copy the value of the selected field(s) from the sub-tasks of the current issue.

    • Parent of the current sub-task

:

    • - Select this option to copy the value of the selected field(s) from the parent of the current issue.

    • Issues that belong to the current issue (Epic)

:

    • - Select this option to copy the value of the selected field(s) from the issues that belong to the current Epic.

    • Epic of the current issue

:

    • -Select this option to copy the value of the selected field(s) from the Epic of the current issue.

    • Child issues of the current issue in the Portfolio hierarchy

:

    • - Select this option to copy the value of the selected field(s) from the child issues of the current issue in the Portfolio hierarchy.

    • Parent issue of the current issue in the Portfolio hierarchy

:

    • - Select this option to copy the value of the selected field(s) from the parent issue of the current issue in the Portfolio hierarchy.

    • Issues linked to the current issue through any link type

:

    • - Select this option to copy the value of the selected field(s) from all the issues linked to the current issue.

    • Issues linked to the current issue through the following link type

:

    • - Select this option to copy the value of the selected field(s) from the issues linked to the current issue through a specific link type. Select the specific link type under “Issue link”.

    • Issues returned by the following Nunjucks template

:

    • - Select this option to copy the value of the selected field(s) from the issues returned by the result of a Nunjucks template. Enter a Nunjucks template, which is a comma-separated list of valid issue keys. For example:

      • "TEST-1"

      • "TEST-1","TEST-2"

      • {{ issue.fields.parent.key }}

      • {{ issue.fields.subtasks | join(",", "key") }}

    • Issues returned by the following JQL search

:

    • - Select this option to copy the value of the selected field(s) from the issues returned by a JQL search. Enter a JQL search expression. For example:

      • project = TEST returns issues of the project with the key TEST

      • project = {{ issue.fields.project.key }} and assignee = {{currentUser._accountId}} returns the issues belonging to the same project as the current issue that are assigned to the current user

      • Code Block
        {% if issue.fields.assignee %}
    assignee = {{issue.fields.assignee._accountId}}
{% else %}
    issuekey=INVALID-1
{% endif %}

Note that the {% if %} block is necessary to avoid an invalid JQL query when the issue is unassigned. In that case, the template will return a valid JQL query that returns no issue (issuekey=INVALID-1).

  • Destination Issue(s)

:

  • - Select the issues to which the specified field(s) from the Fields to copy section are copied. The options available here are the same as those from Source Issue(s).

Note

Ensure the number of source issues times the number of destination issues does not exceed a limit of 1000 issues. In such a scenario, the post function will be not run and an error will be logged.

Fields to copy

This section allows you to add a list of fields to copy from the source issue to the destination issue. Specify the following:

  • Source Field

:

  • - Select a field from the source issue(s) to copy the respective field value.

  • Destination Field

:

  • - Select a field from the destination issue(s) to which the source field value is copied.

  • Options

:

  • - Select one or more options for copying the values. Available options:

    • Set only if field is empty

:

    • - Sets the value of the selected destination field only if the field in the destination issue(s) is empty.

    • Create missing value(s)

:

    • - Allows creating any missing component(s) or version(s) while copying to a field that expects Versions or Components. This is applicable for version and component fields.

    • Ignore empty value

:

    • - Does not copy the source value to the destination issue, if the source value is empty or null. This means a blank value will not be assigned to the destination field and the respective field value will be retained as-is.

    • Append value(s) to the field

:

    • - Appends the value(s) to the selected field of the destination issue, instead of replacing its value. This applies to only multi-valued fields.

    • Use value before current transition

:

    • -Takes the selected Source Field value as it was before the transition. This is useful in cases where the user modifies the source field on the Transition screen during the transition and needs the field value prior to the modification.

Click Add another field to add one more field to the list.

Click

the Delete icon

Remove ( remove.pngImage Added ) next to a field to stop copying that field.

Global Options

  • Send notifications

:

  • - Select this option to allow Jira to send notifications for the change in the values of the selected field(s) on the destination issue(s).

Conditional Execution

  • Run this post-function only if a condition is verified: Select this option to run this post-function based on the result of a Nunjucks template (See Conditional execution). The condition mentioned here is evaluated once per combination of source and destination issue.

Run As

:

  • The destination field must be present on the Edit screen applicable to the destination issue

    • The selected user must have the Edit issues permission on the destination issue

    Select one of the following:

    • Run as current user: To set the current user as the author of the field change.

    • Run as add-on user: To set the add-on user as the author of the field change. (Default option)

    • Run as this user: To set any user selected in this field as the author of the field change.

    Note

    Running this post-function as any user other than the "Add-on user" is discouraged

    If you select any option other than "Run as add-on user", so that the change appears to be done by the current user or a specific user, the following must be true:

    Include Page
    [Includes] Post-function - Run As
    [Includes] Post-function - Run As

    Delayed execution

    Include Page
    [Includes] Delayed Execution
    [Includes] Delayed Execution
    Info

    JMWE shows an error message on the issue view if any error occurs during the execution of the post-function. This message is only displayed if the current user is a Jira administrator. 

    You are viewing the documentation for Jira Cloud.

    On this page

    Table of Contents
    minLevel1
    maxLevel2
    outlinefalse
    typelist
    printablefalse
    Image Added