How to add labels to all builds in a plan using Bamboo Command Line Interface (CLI)

This article explains how to add labels to all the builds in a particular plan using the Bamboo Command Line Interface (CLI) app.

Instructions

Use the runFromBuildList action along with addLabels to add labels in all the builds under the Bamboo plan.

1. Execute the below CLI action.
   

    --action runFromBuildList --plan "TR-TP" --common "-a addLabels --build "@build@" --labels label1"

   Here is the output of the action:
   

   Run: -a addLabels --build TR-TP-10 --labels label1
   'label1' labels were added to TR-TP-10.
   
   Run: -a addLabels --build TR-TP-9 --labels label1
   'label1' labels were added to TR-TP-9.
   
   Run: -a addLabels --build TR-TP-8 --labels label1
   'label1' labels were added to TR-TP-8.
   
   Run: -a addLabels --build TR-TP-7 --labels label1
   'label1' labels were added to TR-TP-7.
   
   Run: -a addLabels --build TR-TP-6 --labels label1
   'label1' labels were added to TR-TP-6.
   
   Run: -a addLabels --build TR-TP-5 --labels label1
   'label1' labels were added to TR-TP-5.
   
   Run: -a addLabels --build TR-TP-4 --labels label1
   'label1' labels were added to TR-TP-4.
   
   Run: -a addLabels --build TR-TP-3 --labels label1
   'label1' labels were added to TR-TP-3.
   
   Run: -a addLabels --build TR-TP-2 --labels label1
   'label1' labels were added to TR-TP-2.
   
   Run: -a addLabels --build TR-TP-1 --labels label1
   'label1' labels were added to TR-TP-1.
   
   Run completed successfully. 10 actions were successful 
   
   

   Check the below screenshot to see how it appears after adding the labels: