Versions Compared

Old Version 25

changes.mady.by.user Elena Amandola (Deactivated)

Saved on

compared with

New Version Current

changes.mady.by.user Robert Bergman

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The Secure Properties key store can store any value, while it prevents sensitive credentials from being stored as plain text on disk.

Info

The use of Secure Properties is optional.

Once you have configured the use of Secure Properties, ACLI will require the password before executing any actions. The password can be provided interactively each time ACLI is run, or via an environment variable.

The ACLI Shell can also create Secure Properties entries as part of its guided site configuration functionality, which can be launched using the slash-command, /sites add.

Note

If you forget the password to a Secure Properties key store, the only solution is to manually rename or delete the file (we recommend renaming if there’s any hope you will later remember the password).

The key store file is named .acli.keystore and can be found in your user home directory.

Appfire support cannot recover data stored in these files if you forget your password!

Working with Secure Properties

Secure Properties adds actions for creating, updating, reading, and deleting values in an encrypted key store. This key store can then act as a source of variable values that can be referenced in acli.properties.

Prior to the introduction of secure properties, resolution of variables in the acli.properties configuration file included a search of these locations:

  1. other properties defined in acli.properties

  2. Java system properties

  3. runtime environment variables

The Secure Properties key store adds a 4th location from which variables may be resolved. By default, this location is only consulted for values if the variable name contains the secret: prefix.

Using Secure Properties consists in of three main steps:

Creating a key store

When you create the key store file (named .acli.keystore), it can be found in your home directory.
Each ACLI user on a given system has their own such file. Note that on a multi-user system, each user is required to maintain their own ACLI installation.

The key store file path can be overridden to point to an alternative location through the use of the environment variable ACLI_SECURE_PROPERTIES. This can be useful if you need to work with multiple key stores or multiple installations of ACLI, but typically should not be needed.

When a secure property is first added, ACLI:

  1. First prompts for the value of the secret to be stored.

  2. Prompts for the new key store file password (with confirmation).

To create a your key store, run the action setSecureProperty, as shown in the example:

Code Block
languagenone
$ acli system setSecureProperty --name my.secret --secret -
Enter secure value: <secret value prompt>
Secure properties file does not yet exist. Creating...
Enter new secure properties password: <new password prompt>
Confirm secure properties password: <new password prompt>
Remember your
password, it cannot be recovered!
Secure properties file created.
Value for key 'foo' set in secure properties file.

The value for the --secret parameter, provided in the example, is - This The value set to - indicates that the value should be obtained via an interactive prompt (or read from stdin if not connected to a tty).

We strongly recommend that you use this method to provide sensitive values to avoid they are not them being accidentally recorded in your shell history, where they would could end up existing in plain text anyway!

The sequence in ACLI is:

  1. First ACLI prompts for the value of the secret to be stored.

  2. ACLI prompts for the new key store file password (with confirmation).

Note

The key store requires a non-blank password. Once created, do not forget the password!

Key store passwords cannot be recovered by ACLI support.

If your password is ever compromised, you should consider the contents of the key store to also be compromised and rotate any secrets it contains accordingly.

Referencing secrets in acli.properties

When in use, the key store file can be used to provide values to acli.propertiesby way of substitution variables similar to the current method of referring to environment variables or other properties (i.e., using ${my.variable} syntax).

In ACLI 11.0.0, the default The syntax for referring to key store values is using a variation of that the syntax of the form ${secret:my.secret} (note the addition of the secret: prefix).

Because the key store is password-protected, we require the secret: prefix allows you to only consult the key store only when necessaryfor the Secure Properties key variables. To disable this requirement, set the environment variable ACLI_SECURE_PROPERTIES_SAFE_MODE=false.

When disabled, the key store is consulted for variable names that are not found in the acli.properties file or the environment, this may result in an interactive prompt requesting to supply a password!

Unlocking the key store

...

Normally, this means that ACLI prompts you for your key store password before it continues (or reads it from stdin when not connected to a tty). You may also decide to To short-circuit the prompting behavior by setting , set the environment variable ACLI_SECURE_PROPERTIES_PASSWORD with your password as a value.

Note

Setting your key store password as an environment variable may or may not be appropriate, depending on your risk tolerance. Doing so is a convenience that comes at a cost of reduced security.

Advantage:
If your key store file escapes your system, it is strongly encrypted.

Disadvantage:
Storing your key store password as an environment variable may make it easier allow a sophisticated attack to compromise your key store in a sophisticated attack.

Whether you decide this is an acceptable risk is entirely at your discretion, and depends on considerations on the threat modelling modeling that you and your organisation organization use.

Use this method at your own risk.

...

Code Block
breakoutModewide
languagenone
my-jira = jiracloud -s https://myjira.atlassian.net -u me@example.com -t ${secret:my-jira.token}

The following Actions and Examples table shows how you can work with the secure properties and provides examples.

Actions and Examples

setSecureProperty

This action sets or overwrites a secure property in the key store. If a property name already exists, you are prompted to confirm that you wish to overwrite the value. Use --replace to skip the confirmation prompt.

Example: Set Secure Property

Code Block
$ acli system -a setSecureProperty --name my-jira.token --secret
Enter secure properties password: <password prompt>
Value for key 'my-jira.token' set in secure properties file.

clearSecureProperties

This action clears the entire secure properties key store file. To ensure that a value is not accidentally removed, you are prompted for confirmation. If you add the --force parameter, the secure property file is removed without confirmation.
To complete the action, you are prompted to insert the key store password.

Note

If you have forgotten the password, you must manually rename or delete the key store file (named .acli.keystore) in your home directory.

We recommend renaming the file (rather than deleting it) if there’s any chance you might later remember the password and still need the contents of the file.

Example: Clear all Secure Properties

Code Block
languagenone
$ acli system -a clearSecureProperties
Enter secure properties password: <password prompt>
Enter CONFIRM to permanently clear all secure properties (CANNOT be undone): CONFIRM
Secure properties cleared.

getSecureProperty

This action retrieves a secure property from the key store. By default, it only indicates whether the named entry exists in the key store. To retrieve the property value as well, use: --outputFormat 2.

Example: Get Secure Property

Code Block
languagenone
$ acli system -a getSecureProperty --name foo
Enter secure properties password: <password prompt>
Secure property 'foo' exists in the secure properties file.

Example: Get Secure Property with value

Code Block
languagenone
$ acli system -a getSecureProperty --name foo --outputFormat 2
Enter secure properties password: <password prompt>
Value of secure property 'foo': bar

importSecureProperties

This action allows you to import secure properties from another key store file to your default key store. To do so, you need the password for both the source and destination key stores.
OPTIONS

  • Use the --replace parameter to avoid being asked to confirm overwriting properties during import.

  • Use the --include and --exclude parameters to filter the properties being imported.

Note that each of the imported properties, take a regular expression value that is evaluated against the list of keys in the source key store.

Note

This can be useful for sharing selected secure properties, just ensure to not store or transmit the key store password with the key store file!

The following examples assume that both .acli.keystore and import.keystore contain entries for the keys foo and bar.

Example: Import Secure Properties

Code Block
languagenone
$ acli system -a importSecureProperties -f import.keystore
Enter secure properties password: <destination password prompt>
Enter inbound secure properties password: <source password prompt>
Imported 0 secure properties.
Ignored: buz,foo. Use --replace to overwrite existing values.

Example: Import select Secure Properties (via inclusion) with replacement

Code Block
languagenone
$ acli system -a importSecureProperties -f import.keystore --include '(?i)^F' --replace
Enter secure properties password: <destination password prompt>
Enter inbound secure properties password: <source password prompt>
Imported 1 secure property: foo.

removeSecureProperty

This action removes a secure property from the key store. To ensure that a value is not accidentally removed, you are prompted for confirmation.

If you add the --force parameter, the secure property is removed without confirmation.

If after this operation the key store is empty, it is automatically removed.

Example: Remove a Secure Property

Code Block
languagenone
$ acli system -a removeSecureProperty --name my-jira.token
Enter secure properties password: <password prompt>
Enter CONFIRM to permanently remove the secure property 'my-jira.token': CONFIRM
Removed value for key 'my-jira.token' from secure properties file.

Example: Force remove a Secure Property (with deletion of empty key store)

Code Block
$ acli system -a removeSecureProperty --name my-jira.token --force
Enter secure properties password: <password prompt>
Removed value for key 'my-jira.token' from secure properties file.
Deleted empty keystore file.

exportSecureProperties

This action allows you to export secure properties from your default key store to another key store file. To do so, you need the password for both the source and destination key stores.

OPTIONS

  • Use the --replace parameter to avoid being asked to confirm overwriting properties during export.

  • Use the --include and --exclude parameters to filter the properties being exported.

Note that each of the exported properties, take a regular expression value that is evaluated against the list of keys in the source key store.

The following examples assumes that both .acli.keystore and import.keystore contain entries for the keys foo and bar.

Example: Export select Secure Properties (via exclusion) with replacement

Code Block
languagenone
$ acli system -a exportSecureProperties -f export.keystore --exclude '(?i)^F' --replace
Enter secure properties password: <source password prompt>
Enter outbound secure properties password: <destination password prompt>
Exported 1 secure property: buz.

getSecurePropertyList

This action returns all secure properties from the key store. To retrieve the list of property values as well, use: --outputFormat 2.

Example: Get Secure Property list

Code Block
languagenone
$ acli system -a getSecurePropertyList
Enter secure properties password:<password prompt>
2 secure properties in list
"Name"
"buz"
"foo"

Example: Get Secure Property list with values

Code Block
languagenone
$ acli system -a getSecurePropertyList --outputFormat 2
Enter secure properties password:<password prompt>
2 secure properties in list
"Name","Value"
"buz","qux"
"foo","bar"

Locating your Secure Properties key store

Your key store is normally located in your home directory and is named .acli.keystore. ACLI

will display

displays the file path as part of the detailed getClientInfo output (if it exists).

Example: Display key store file path

Code Block
$ acli -a getClientInfo --outputFormat 2
Enter secure properties password:<password prompt>
Client information

Client name . . . . . . . . . : cli
Client version  . . . . . . . : 11.0.0
...
Secure properties . . . . . . :
  File  . . . . . . . . . . . : /Users/me/.acli.keystore